Your bathroom flash is slower than before. Yes, it affects the effectiveness of the toilet. A slow toilet cannot flush effectively. Ultimately, that slowness of movement will turn into a blockage or worse.
There are many reasons why your toilet flushing slow, from the simple to the complex. If you can know the reasons why your toilet is slow to flush, you can fix the problem.
4 Reasons Why Your Toilet Flushing Slow
We cover the four most common causes of the toilet flushing slow and explain how to slowly drain water from the toilet.
1. Not have enough water in the tank
When you flush the toilet, the water in the toilet tank flows into the toilet with great force. When all of that water is in, the laundry is sucked downward. If there is not enough water in the tank, the toilet will not have enough suction power, and the flush will be insufficient.
The tank must be filled with water to about 1/2 inch below the drain pipe. If the tank isn’t full enough, the water flow is too weak. There are two things that can block the flow of water to the water tank.
Possible low water pressure, an improperly adjusted water valve, or trip assembly failure Both of these problems can be easily fixed by a local plumber.
2. Minerals build up around the jet hole in the toilet
As it flows, water spurts from the jet nozzle. The toilet jet hole is easy to forget because it is small and inconspicuous. They also tend to forget to clean.
Minerals can build up in and around the toilet bowl if it is not cleaned frequently. Over time, these accumulated minerals can obstruct water flow. If the toilet is slow but doesn’t clog, this can be the problem.
Use distilled white vinegar and a small, hard toilet brush to break up any buildup of stains around the flushing hole. First, spray the buildup with white vinegar. Let the vinegar sit for 30 minutes.
3. A worn or bad flapper valve new option in the bathroom
A flapper valve is a rubber stopper at the bottom of the toilet tank. Block the passage to the toilet. Tapping on the handle on the toilet raises the flapper to reveal the passageway’s lid. Water flows from the tank into the bowl, creating an overflow through the channel you just explored.
Flapper valves deteriorate over time. If the paddle wears out, it will not properly cover the passage between the tank and bowl. This sounds like “running” all the time in the bathroom.
From the tank, water constantly leaks into the bowl, and the flow is impaired. Replacing the flapper by yourself is relatively straightforward, but you can also ask a plumber to do it for you.
4. Clogged drain pipe
Clogged drains affect every electrical appliance that uses water in your home, including your toilet. Hitting your back against a pipe or drain slows the movement of water in your house. Even partial blockages can affect a toilet’s ability to flush water.
The easiest way to fix this (and avoid it in the long run) is to invest in regular professional drain cleaning. Now you know some reasons why your toilet flushing slow, if you find this, you can look for ways to fix it immediately.