Standard Shower Valve Height: Quick Guide

If you’re setting up shower fixtures, you probably haven’t paid much regard to the placement of the shower valve height.

However, where you put your shower’s fitting matters, especially if you’re remodeling your bathroom, this is a critical decision to make.

Things to Consider

Tall individuals are generally acutely aware of how inconvenient it is to squat down while washing their hair under the showerhead which is set low enough.

In a comparable manner you are unlikely to be leaning over in a shower as soap pours into your eyes when you search for the faucet to change the temperature and water pressure.

You can establish the right height for the shower valve along with other shower fittings by adhering to a few common criteria and evaluating your family’s particular demands.

The Right Shower Valve Height

Standard Shower Valve Height

The position of a shower valve is determined by whether it is required to fit a shower stall as well as a shower setup in a bathtub. Lower valve heights are required for showers installed in bathtubs since the valves have to connect with both shower and bath tap.

Valve heights in bathtub shower installations are typically 28 inches, or a total of 2 feet 4 inches. Set the valve on the typical height for 48 inches, or about 4 feet, in shower stalls. Place faucets at the exact same height as the valve and equally spaced from it.

Shower Head Standard Height

Installing a shower head at the appropriate height ensures every person in the house can easily fit under it while showering.

A showerhead’s standard minimum height is 72 inches; however, the common advice is to position it 80 inches from above the shower pan. Even extremely tall individuals may stand beneath it at this height.

You’re limited to the height of this shower stall when you want them even higher, yet one possibility is to set the tube from the faucet just above your shower then install the rainfall showerhead.

How Far Are the Fittings Apart?

How Far Are the Fittings Apart

The plumbing distance between the fittings on the shower stall which has a 72-inch head with a 48-inch valve approximately 24 inches, or just 2 feet.

The gap between such fittings in a bathtub with a 72-inch head with a 28-inch valve is approximately 44 inches, or just 3 feet 8 inches. The distance between these items can be adjusted. For example, if you set a valve on 48 inches but relocate its head for 76 inches, about 52 inches of room is accessible.

It’s a good idea to use the same space as a standard bathroom faucet, which means the hot-cold-water handles should be 8 inches apart, one 4 inches at the right from the valve while the other is 4 inches on the left of it.

Read also:

Personal Preferences and Local Codes

Personal preference or local codes represent two of the most significant factors to consider while installing shower fixtures. For example, while sources indicate 72 inches as the norm for heads, with others preferring 76 inches, if somebody in your family is 5-6 foot or 77 inches tall, they require a taller head.

Finally, as long as you follow local plumbing rules, you may install fittings at a height that is comfortable for yourself. Before beginning any form of installation, always verify with local codes.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.